TAG :: Toronto Area Geocachers

Garmin has published some more Beta firmware updates. While these can enable additional functionality, they’re not always fully baked – you might have to deal with unexpected problems when you run a “beta”.

GPSMAP 62/78 2.95 Beta:

Change History

Changes made from version 2.94 to 2.95:

• Fixed issues relating to WAAS performance.
• Fixed issue where the device would not regain a GPS signal after losing the GPS signal in a tunnel.
• Fixed shutdown on the map screen when a waypoint was being moved to the same location as a geocache or other POIs.
• Fixed issue where proximity waypoint alerts could only be set in feet regardless of what was selected as a Distance/Speed unit in the setup page.
• Fixed an issue where the enabled/disabled option for custom maps could not be changed when two or more BirdsEye™ Satellite Imagery providers were on the device.
• Fixed an issue where the device would not beep when approaching a destination while routing off-road.
• Problems with the software may be reported to 62-78Beta@garmin.com

Oregon x50 4.49 Beta:

Change History

Changes made from version 4.47 to 4.49:

• Fixed issues relating to WAAS performance.
• Fixed issue where the device would not regain a GPS signal after losing the GPS signal in a tunnel.
• Fixed shutdown on the map screen when a waypoint was being moved to the same location as a geocache or other POIs.
• Fixed an issue where the enabled/disabled option for custom maps could not be changed when two or more BirdsEye™ Satellite Imagery providers were on the device.
• Fixed an issue where the device would not beep when approaching a destination while routing off-road.
• Problems with the software may be reported to OregonBeta@garmin.com

Thanks Allory_D (Twitter)

[ GPSMap 62/78 Beta ] [ Oregon x50 Beta ]

Related Posts:

• New Garmin Beta Firmware – Oregon, GPSMAP 62/78, Dakota
• Pro Tip: Downgrading your Garmin GPSr firmware
• New beta firmware for GPSMAP 62/78, Oregon x50, Oregon and Dakota GPS Receivers

Garmin has posted a batch of beta firmware downloads for their current outdoor product line. This affects the GPSMAP 62, GPSMAP 78, Oregon and Dakota lines. The updates are pretty much identical across the board, fixing GPS performance, JNX (Bird’s Eye) handling and a few crash bugs.

Please remember these are beta releases so while you are getting new features and fixes, there is nothing to say your GPS won’t do weird things after loading this software.

GPSMAP 62/78 2.93 Beta:

Changes made from version 2.92 to 2.93:

• Improved GPS performance
• Improved JNX file handling
• Increased maximum number of supported JNX files to 250 from 200
• Fixed shutdown when unit had more than the maximum number of JNX files on it
• Fixed shutdown related to topographical maps and land cover text size
• Fixed Glide Ratio to Destination field
• Fixed problem with profiles and the fields on the map page
• Problems with the software may be reported to 62-78Beta@garmin.com

Oregon 200/300/400 4.16 Beta:

Changes made from version 4.12 to 4.16:

• Improved GPS performance
• Improved JNX file handling
• Improved the usability of the main menu setup page
• Increased maximum number of supported JNX files to 250 from 200
• Fixed shutdown when unit had more than the maximum number of JNX files on it
• Fixed shutdown related to topographical maps and land cover text size
• Fixed shutdown associated with certain custom POI files
• Fixed Glide Ratio to Destination field
• Fixed an issue related to adding a geocache as a point in a route
• Problems with the software may be reported to OregonBeta@garmin.com

Oregon x50 v4.45 Beta:

Changes made from version 4.32 to 4.45:

* Improved GPS performance
* Improved JNX file handling
* Improved the usability of the main menu setup page
* Increased maximum number of supported JNX files to 250 from 200
* Fixed shutdown when more than the maximum number of JNX files were present
* Fixed ‘Search Near’ functionality on Hunt & Fish and Sun & Moon pages
* Fixed shutdown related to topographical maps and land cover text size
* Fixed shutdown associated with certain custom POI files
* Fixed Glide Ratio to Destination field
* Fixed problem with profiles and the fields on the map page

Dakota 4.01 Beta:

Changes made from version 3.82 to 4.01:

• Improved GPS performance
• Improved JNX file handling
• Improved the usability of the main menu setup page
• Increased maximum number of supported JNX files to 250 from 200
• Fixed shutdown when unit had more than the maximum number of JNX files on it
• Fixed shutdown related to topographical maps and land cover text size
• Fixed shutdown associated with certain custom POI files
• Fixed Glide Ratio to Destination field
• Fixed issue with profiles and the fields on the map page
• Problems with the software may be reported to OregonBeta@garmin.com

Update: Added Oregon x50 series Beta

Related Posts:

• New beta firmware for GPSMAP 62/78, Oregon x50, Oregon and Dakota GPS Receivers
• Pro Tip: Downgrading your Garmin GPSr firmware
• Oregon x50 v4.31, Oregon v4.11, and Dakota v3.81 Beta Firmware

This tip is for the Colorado, Oregon, GPSMAP 62/78 and Dakota line of Garmin GPS recievers.

The story goes something like this.  You upgraded your Garmin GPS receiver to the latest beta firmware.  Perhaps it was because of a new feature, or a bug that was listed as fixed, or a bug that wasn’t listed but you were hoping was fixed, or you’re just a glutton for punishment.  Whatever the reason, you’re now running the latest and greatest.  Or so you thought…  You notice that a new bug, or two, has been introduced.  It’s serious enough that the reason you upgraded isn’t worth the aggravation.  You want to go back.

If you were running a previous beta it’s easy.  Just run the EXE file for that firmware and you’re back to where you were.

But what if you want to go back to a release version.  You don’t have an EXE for that since you’ve probably used Webupdater to load it.  No problem.  Webupdater puts the firmware file in the Garmin folder on your unit in a file called gupdate.gcd.  All you had to do was copy this file somewhere else before you rebooted your GPS receiver.  Just copy that file back to the Garmin folder and reboot.  You’re done.

“But I didn’t back up anything!”, you say.  Since this is the first time you want to go back you probably didn’t make a back up of the firmware file.  Fortunately you’re not stuck.  The good folks at gpsfix.net have prepared for this possibility and have links to the firmware files on their wiki pages.  Just download GCD file for the firmware you want, rename it to gupdate.gcd, put it in your Garmin folder on your GPS receiver and reboot.

There is one small gotcha.  Going back to a previous version of firmware will reset all the settings on your GPSr.  Your battery type, WAAS enabled, units, and other customizations will all go back to defaults.  Your loaded maps, geocaches and custom POI will be left alone.  Waypoints will probably survive as well.

Here’s the links to the wiki pages for all the GPS recievers:

• Colorado
• Oregon
• Oregon x50
• GPSMAP 62/78
• Dakota

Related Posts:

• New Garmin Beta Firmware – Oregon, GPSMAP 62/78, Dakota
• New beta firmware for GPSMAP 62/78, Oregon x50, Oregon and Dakota GPS Receivers
• Opencaching.com also updates their site – Now with cache verifications

Garmin has release a second round of firmware updates for their Geocaching capable receivers.

GPSMAP 62/78 v2.92: Download

• Fixed issues with WAAS/EGNOS
• Fixed issue with progress bar displaying properly on power up
• Fixed issue with track navigation not adding waypoints to the Active Route list when they are exactly equal to a track point

Oregon v4.12: Download

• Fixed issues with WAAS/EGNOS
• Fixed issue with photo viewer not displaying correctly
• Fixed issue with 3D view
• Fixed issue with track navigation not adding waypoints to the Active Route list when they are exactly equal to a track point

Oregon x50 v4.32: Download

• Fixed issues with WAAS/EGNOS
• Fixed issue with moon not showing on sun and moon page
• Fixed issue with photo viewer not displaying correctly
• Fixed issue with progress bar displaying properly on power up
• Fixed issue with waypoint distances showing significantly off in the waypoint manager
• Fixed issue with 3D view
• Fixed issue with track navigation not adding waypoints to the Active Route list when they are exactly equal to a track point

Dakota v3.82: Download

• Fixed issues with WAAS/EGNOS
• Fixed a hang that occurred when a unit had 1000 auto-named waypoints
• Fixed issue with track navigation not adding waypoints to the Active Route list when they are exactly equal to a track point

As always, use at your own risk.  If you have to go back  to a previous version of firmware it will reset all your settings to default.

Related Posts:

• New Garmin Beta Firmware – Oregon, GPSMAP 62/78, Dakota
• Pro Tip: Downgrading your Garmin GPSr firmware
• Oregon x50 v4.31, Oregon v4.11, and Dakota v3.81 Beta Firmware

Garmin has made the beta v2.91 firmware for the GPSMAP 62/78 series GPS receivers available for download. As with all beta firmware, use at your own risk.

The fixes in this version:

• Updated magnetic Earth field data
• Improved GPS performance
• Fixed issue with track navigation sometimes not adding waypoints to the Active Route list
• Fixed issue with track and route review from the map page if you came from the elevation plot
• Fixed issue with MPC map labels disappearing
• Fixed issue with gpi files that have alerts attached to the points

The firmware can be downloaded at: GPSMAP 62/72 Updates & Downloads

Related Posts:

• New Garmin Beta Firmware – Oregon, GPSMAP 62/78, Dakota
• New beta firmware for GPSMAP 62/78, Oregon x50, Oregon and Dakota GPS Receivers
• Pro Tip: Downgrading your Garmin GPSr firmware